Arduino

Arduino Due- made in ITALY- CE ROHS-Free USB

Arduino Due- made in ITALY- CE ROHS-Free USB

Product Details: Arduino Board Condition: New Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-16V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 (DAC) Total DC Output Current on all I/O lines: 130 mA DC Current for 3.3V Pin: 800 mA DC Current for 5V Pin: 800 mA Flash Memory: 512 KB all available for the user applications SRAM: 96 KB (two banks: 64KB and 32KB) Clock Speed: 84 MHz Summary: The Arduino Due is a microcontroller board based on the Atmel SAM3X8E CPU, which is the first one based on 32-bit ARM core arduino. The Arduino Due has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84 MHz clock, a USB-OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. Color: show as pictures PLS NOTE...
Rs1,300.00
Add:
Arduino nano v3.0 ATmega328 P-20AU Module

Arduino nano v3.0 ATmega328 P-20AU Module

Product description The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.0) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. 1. Employs Atmega328P-AU single chip 2. Supports USB download and power supply / ISP download 3. Comes with cable length: 25cm It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech. Technical Details   Brand KitsGuru Model Arduino nano v3.0 Item Weight 91 g Product Dimensions 12.9 x 6.2 x 1.8 cm Item model number Arduino nano v3.0 Additional Features USB Batteries Included No
Rs260.00
Add:
Arduino Pro Mini Atmega328 5V 16Mhz

Arduino Pro Mini Atmega328 5V 16Mhz

Product description Arduino Pro Mini board is more suitable for applications and installations where space is premium and projects are made as permanent set ups. This board is a 5 V version, powered by ATmega328. Power The Arduino Pro Mini can be powered with an FTDI cable or breakout board connected to its six pin header, or with a regulated 5V supply on the Vcc pin. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC. The power pins are as follows: RAW For supplying a raw voltage to the board. VCC The regulated 5 volt supply. GND Ground pins.   Technical Details   Brand CENTIoT Item Weight 91 g Product Dimensions 12.9 x 6.3 x 1.8 cm Item part number ACK-ARD-PRO-MINI-5V16M Operating System Linux, Windows Additional Features PWM Pins: 6, UART: 1, SPI: 1, I2C: 1, Analog Input Pins: 6, External Interrupts: 2, DC Current per...
Rs220.00
Add:
Mega 2560 with USB cable for Arduino

Mega 2560 with USB cable for Arduino

Product description The Mega 2560 is an update for the Arduino Mega, which it replaces.The board is a microcontroller board based on the ATmega2560-16AU. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila. Features: 100% Brand new and high quality! CH340G replace the Atmega 8U2/16U2 CH340G Driver Download link, please copy the link and paste in browser: 1 Specification: Microcontroller:ATmega2560 Clock Speed:16 MHz EEPROM:4 KB SRAM:8 KB Flash Memory:256 KB of which 8 KB used by bootloader Operating Voltage:5V Input Voltage (recommended):7-12V Analog...
Rs900.00
Add:
Arduino Uno R3 Board

Arduino Uno R3 Board

Arduino Uno R3 Board The Arduino Uno R3 is a open source microcontroller board based on the ATmega328 chip. This Board has 14 digital input/output pins, 6 analog input pins, Onboard 16 MHz ceramic resonator, Port for USB connection, Onboard DC power jack, An ICSP header and a microcontroller reset button. It contains everything needed to support the microcontroller. Using the board is also very easy, simply connect it to a computer with a USB cable or power it with DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2Atmega8U2 up to version R2) programmed as a USB-to-serial converter. While the Arduino UNO can be powered via the USB connection or with an external power supply, the power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm...
Rs490.00
 Buy Now Units:  100
Your IP Address is: 54.224.13.210
Copyright © 2017 Robotscraft. Powered by Zen Cart