All Products

Flame Sensor Module

In Stock: 200

Add:

Model: RCS-SENSORS-510
Price: Rs110.00

Weight: 200grams

Flame Sensor Module Flame Detection Sensor Module is sensitive to the flame, but also can detect ordinary light. Usually used as a flame alarm. Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm. Detection point of about 60 degrees, particularly sensitive to the flame spectrum. Sensitivity is adjustable, stable performance. Features of Flame Sensor Module :   Detection angle about 60 degrees, it is sensitive to the flame spectrum. Accuracy adjustable. Operating voltage 3.3V-5V Output a. analog voltage outputb. digital switch outputs (0 and 1) With a mounting screw holePCB size: 3cm * 1.6cm Power indicator (red) and digital switch output indicator (green) Comparator chip LM393 ,it is stable. Flame detection distance, lighter flame test can be triggered within 0.8m, if the intensity of flame is high , the detection distance will be increased.
Futaba S3003 Servo Motor 3.2 KG Torque For Arduino/Raspberry-Pi

In Stock: 100

Add:

Model: RCS-RC-8701
Price: Rs399.00

Weight: 150grams

Futaba S3003 Servo Motor 3.2 KG Torque for Arduino/Raspberry-Pi/Robotics The Futaba S3003 Plastic Geared Servo Motor is a decent servo for every hobbyist and electronics student. The powerful motor is PWM controlled for easy interfacing. Features of Futaba S3003 Servo Motor 3.2 KG Torque. Control System: +Pulse Width Control 1520usec Neutral Required Pulse: 3-5 Volt Peak to Peak Square Wave Operating Voltage: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C Operating Speed (4.8V): 0.23sec/60 degrees at no load Operating Speed (6.0V): 0.19sec/60 degrees at no load Stall Torque (4.8V): 44 oz/in. (3.2kg.cm) Stall Torque (6.0V): 56.8 oz/in. (4.1kg.cm) Operating Angle: 45 Deg. one side pulse traveling 400usec Continuous Rotation Modifiable: Yes Direction: Counter Clockwise/Pulse Traveling 1520-1900usec Current Drain (4.8V): 7.2mA/idle Current Drain (6.0V): 8mA/idle Motor Type: 3 Pole Ferrite Potentiometer Drive: Indirect Drive Bearing Type: Plastic Bearing Gear Type: All ... more info
Gas Sensor For Arduino

In Stock: 200

Add:

Model: RCS-SENSORS-512
Price: Rs1,500.00

Weight: 0grams

Gas Sensor Kit for Arduino And Raspberry Pi The Package Includes Following Products :   MQ-135 Air Quality & Hazardous Gas Sensor Module MQ-2 Smoke Methane Gas & Liquefied Flammable Gas Sensor Module MQ-3 Alcohol Ethanol Gas Sensor Module MQ-4 Methane Gas Sensor Module MQ-5 Liquefied Gas & Coal Gas Sensor Module MQ-6 Isobutene Propane Gas Sensor Module MQ-7 Carbon Monoxide Gas Sensor Module MQ-8 Hydrogen H2 Gas Sensor Module MQ-9 Carbon Monoxide Combustible Gas Sensor Module)
Heart Beat Sensor for Arduino And Raspberry Pi

In Stock: 200

Add:

Model: RCS-SENSORS-515
Price: Rs199.00

Weight: 300grams

HEART BEAT SENSOR For Arduino And Raspberry Pi This module uses bright infrared (IR) LED and a phototransistor to detect the pulse of the finger, a red LED flashes with each pulse. Pulse monitor works as follows: The LED is the light side of the finger, and phototransistor on the other side of the finger, phototransistor used to obtain the flux emitted, when the blood pressure pulse by the finger when the resistance of the phototransistor will be slight changed. We choose a very high resistance resistor R1, because most of the light through the finger is absorbed, it is desirable phototransistor sensitive enough. Resistance can be selected by experiment to get the best results. The most important is to keep the shield stray light into the phototransistor. For home lighting that is particularly important because the lights at home mostly based 50HZ or 60HZ fluctuate, so faint heartbeat will add considerable noise.
Johnson Geared Motor 100 RPM 12v dc gear for robotics

In Stock: 100

Add:

Model: Johnson-Geared-Motor-100-RPM
Price: Rs390.00

Weight: 500grams

The Johnson Geared motor is famous for its compact size and massive torque. A torque as much as x3 as compared to center shaft or side shaft geared motor, with an affordable price tag. The motor comes with a metal gearbox and off centered shaft , also shaft has a metal bushing for wear resistance. Apart from robotic application they are also used in industrial applications, vending system, hygiene and cleaning industry, and household electric appliance. Specifications - RPM - 100 Shaft Diameter - 6mm (with internal hole) Shaft Length - 15 mm Dimensions : Gearbox diameter - 37mm; Motor Diameter - 28.5 mm; Length (body only) - 63mm Weight - 300 gms Torque - 12 kgcm Voltage - 6 to 24 (Nominal Voltage - 12v) No-load current = 800 mA(Max), Load current = 9 A(Max)
Johnson Geared Motor 60 RPM 12v dc gear for robotics

In Stock: 100

Add:

Model: Johnson-Geared-Motor-60-RPM
Price: Rs390.00

Weight: 500grams

The Johnson Geared motor is famous for its compact size and massive torque. A torque as much as x3 as compared to center shaft or side shaft geared motor, with an affordable price tag. The motor comes with a metal gearbox and off centered shaft , also shaft has a metal bushing for wear resistance. Apart from robotic application they are also used in industrial applications, vending system, hygiene and cleaning industry, and household electric appliance. Specifications - RPM - 60 Shaft Diameter - 6mm (with internal hole) Shaft Length - 15 mm Dimensions : Gearbox diameter - 37mm; Motor Diameter - 28.5 mm; Length (body only) - 63mm Weight - 300 gms Torque - 12 kgcm Voltage - 6 to 24 (Nominal Voltage - 12v) No-load current = 800 mA(Max), Load current = 9 A(Max)
KK2.15 LCD Flight Control Board

In Stock: 10

Add:

Model: RCS-8703
Price: Rs1,450.00

Weight: 100grams

KK2.15 LCD Flight Control Board 6050MPU 644PA Multirotor update version for KK2 kk2.1 The KK2.1.5 is next big evolution of the first generation KK flight control boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pr-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts. Features of KK2.15 LCD Flight Control Board 6050MPU 644PA Multi-rotor: Size: 50.5mm x 50.5mm x 12mm. Weight: 21 gram (Inc Piezo buzzer). IC: Atmega644 PA. Gyro/Acc: 6050MPU InvenSense Inc. Auto-level: Yes. Input Voltage: 4.8-6.0V. AVR interface: standard 6 pin. Signal from Receiver: 1520us (5 channels). Signal to ESC: 1520us. Firmware Version: 1.9S. Pr-installed firmware. Applications of KK2.15 LCD ... more info
L3G4200D 3AXIS GYRO

In Stock: 200

Add:

Model: RCS-SENSORS-504
Price: Rs595.00

Weight: 200grams

L3G4200D 3AXIS GYRO Raw angular rate and temperature data measurements are accessed from the selectable digital I2C or SPI interface. The small package design and SIP interface accompanied by the mounting hole make the sensor easy to integrate into your projects. Designed to be used with a variety of microcontrollers, the module has a large operating voltage window. Features of  :   3-axis angular rate sensor (yaw, pitch & roll) make it great for model aircraft navigation systems. Supports both I2C and SPI for whichever method of communication you desire. Three selectable scales: 250/500/2000 degrees/sec (dps) Embedded power down and sleep mode to minimize current draw 16 bit-rate value data output 8-bit temperature data output
LASER RANGING SENSOR TOF BASED ON VL53L0X

In Stock: 200

Add:

Model: RCS-SENSORS-513
Price: Rs1,170.00

Weight: 500grams

LASER RANGING SENSOR TOF BASED ON VL53L0X This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. The VL53L0X uses time-of-flight measurements of infrared pulses for ranging, allowing it to give accurate results independent of the target’s color and surface. Distance measurements can be read through a digital I²C interface. The board has a 2.8 V linear regulator and integrated level-shifters that allow it to work over an input voltage range of 2.6 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards Specifications of VL53L0X Time-of-Flight Distance Sensor break out board :   Resolution: 1 mm/font> Maximum range: 2m Interface: I²C Minimum operating voltage: 2.6 V Maximum operating voltage: 5.5 V Supply current: 10 mA Dimension: 0.5" × 0.7" × 0.085" (13 mm × 18 mm × 2 mm)
LINEAR HALL SENSOR MODULE

In Stock: 200

Add:

Model: RCS-SENSORS-516
Price: Rs115.00

Weight: 300grams

Linear Hall Sensor Module The Hall Effect Magnetic and Proximity Sensor Module can be used to detect the presence (or absence!) of nearby objects such as magnets. This sensor accepts a GND and +5V supply, and has a single digital output which goes low (GND) when a magnetic field is detected. The linear sourcing output voltage is set by the supply voltage and varies in proportion to the strength of the magnetic field. It has a reduced current consumption of only 6 mA typically at 5 Vdc help make this sensor energy efficient. Features of Hall Sensor Module :   49E hall sensor Features wide range voltage comparator LM393 Adjustable sensitivity Signal output indicator Power: 2.3V ~ 5.3V Pin Details :   PIN 1: GND PIN 2: +5V PIN 3: DOUT PIN 3: AOUT
Your IP Address is: 54.166.150.10
Copyright © 2017 Robotscraft. Powered by Zen Cart