All Products

LM35 TEMPERATURE SENSOR

In Stock: 200

Add:

Model: RCS-SENSORS-508
Price: Rs65.00

Weight: 200grams

LM35 Temperature Sensor The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature. The LM35 thus has an advantage over linear temperature sensors calibrated in ° Kelvin, as the user is not required to subtract a large constant voltage from its output to obtain convenient Centigrade scaling. The LM35 does not require any external calibration or trimming to provide typical accuracies of ±1/4 °C at room temperature and ±3/4°C over a full -55 to +150°C temperature range. Low cost is assured by trimming and calibration at the wafer level. The LM35's low output impedance, linear output, and precise inherent calibration make interfacing to readout or control circuitry especially easy. It can be used with single power supplies, or with plus and minus supplies. As it draws only 60 mA from its supply, it has very low self-heating, less than 0.1°C in still air. Features of LM35; :   ... more info
Mega 2560 with USB cable for Arduino

In Stock: 100

Add:

Model: arduino-mega
Price: Rs900.00

Weight: 500grams

Product description The Mega 2560 is an update for the Arduino Mega, which it replaces.The board is a microcontroller board based on the ATmega2560-16AU. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila. Features: 100% Brand new and high quality! CH340G replace the Atmega 8U2/16U2 CH340G Driver Download link, please copy the link and paste in browser: 1 Specification: Microcontroller:ATmega2560 Clock Speed:16 MHz EEPROM:4 KB SRAM:8 KB Flash Memory:256 KB of which 8 KB used by bootloader Operating Voltage:5V Input Voltage (recommended):7-12V Analog ... more info
MG946R Digital RC Servo Motor Metal Gear Torque 13Kg

In Stock: 100

Add:

Model: RCS-RC-8702
Price: Rs480.00

Weight: 150grams

MG946R Digital RC Servo Motor Metal Gear Torque 13Kg for Arduino/Raspberry-Pi/Robotics The Servo DC gear motor is a 360-degree continuous rotation motor which canrotate continuously with both forward & backward. This motor is high torque with easy to interface with any type of micro controller. Features of MG946R Digital Metal Gear RC Servo Motor Torque 13Kg. Torque:4.8V: 138.9 oz-in (10.00 kg-cm). 6.0V: 166.6 oz-in (13.00 kg-cm). Speed: 4.8V: 0.23 sec/60°. 6.0V: 0.20 sec/60°. Applications of MG946R Digital Metal Gear RC Servo Motor Torque 13Kg. Precision movement of reading head. Model robot Model aircraf. DIY projects requiring precision movement and high torque.
MH-Z14 INFRARED CARBONDIOXIDE SENSOR WITH UART/ANALOG/PWM OUTPUT

In Stock: 200

Add:

Model: RCS-SENSORS-519
Price: Rs3,400.00

Weight: 200grams

MH-Z14 INFRARED CARBONDIOXIDE SENSOR WITH UART/ANALOG/PWM OUTPUT MH-Z14 NDIR Infrared gas module is a common type, small size sensor, using non-dispersive infrared (NDIR) principle to detect the existence of CO2 in the air, with good selectivity, non-oxygen dependant, long life. Built-in temperature sensor can do temperature compensation; and it has digital output and analog voltage output. MH-Z14 NDIR Infrared gas module is applied in the HVAC, indoor air quality monitoring, industrial process, safety and protection monitoring, agriculture and animal husbandry production process monitoring. Features of MH-Z14 INFRARED CARBONDIOXIDE SENSOR WITH UART/ANALOG/PWM OUTPUT :   Detection range: 0̚10000ppm Resolution ratio: 5ppm(0-2000ppm), 10ppm(2000-5000ppm), 20ppm(5000-10000ppm) Accuracy: ±50ppm±5% Repeatability: ±30ppm Responsible time:
MOTION DETECTION MODULE BASED ON HB100 MICROWAVESENSOR

In Stock: 200

Add:

Model: RCS-SENSORS-520
Price: Rs1,595.00

Weight: 500grams

MOTION DETECTION MODULE BASED ON HB100 MICROWAVESENSOR HB100 Series of microwave motion sensor module are X-Band Mono-static DRO Doppler transceiver front-end module. These modules are designed for movement detection, like intruder alarms, occupancy modules and other innovative ideas. The sensor module can detect motion upto 15 meters distance and provide an output low signal. The detection anlge is 160°. The output low signal can be used to trig a relay for intruder detection or motion alarm. The sensor module contains two potentiometers namely 1Mohm and 10Kohm for the range and relay switching durations respectively. The minimum logic low signal is 25 seconds once triggered.
MQ-135 AIR QUALITY & HAZARDOUS GAS SENSOR MODULE

In Stock: 200

Add:

Model: RCS-SENSORS-521
Price: Rs295.00

Weight: 300grams

MQ-135 AIR QUALITY & HAZARDOUS GAS SENSOR MODULE It is a hazardous gas detection apparatus for the family, the environment, suitable for ammonia, aromatic compounds, sulphur, benzene vapour, smoke and other gases harmful gas detection, gas-sensitive element test. Air quality sensor is for detecting a wide range of gases, including NH3, NOx, alcohol, benzene, smoke and CO2. Ideal for use in office or factory with simple drive and monitoring circuit. Features of MQ-135 AIR QUALITY & HAZARDOUS GAS SENSOR MODULE :   Dual signal output (analog output, and TTL level output) TTL output valid signal is low Analog output with increasing concentration, the higher the concentration, the higher the voltage Sulphide, benzene, smoke and other harmful gases with high sensitivity Has a long life and reliable stability Rapid response recovery characteristics
MQ-2 SMOKE METHANE GAS & LIQUEFIED FLAMMABLE GAS SENSOR MODULE

In Stock: 200

Add:

Model: RCS-SENSORS-522
Price: Rs205.00

Weight: 300grams

MQ-2 SMOKE METHANE GAS & LIQUEFIED FLAMMABLE GAS SENSOR MODULE The analog gas sensor - MQ2 is used in gas leakage detecting equipments in consumer and industry markets, this sensor is suitable for detecting LPG, i-butane, Propane, Methane , Alcohol, Hydrogen and Smoke. It has a high sensitivity and fast response time and the sensitivity can be adjusted using the potentiometer.. Features of MQ-2 SMOKE METHANE GAS & LIQUEFIED FLAMMABLE GAS SENSOR MODULE :   Power supply needs: 5V Interface type: Analog Pin Definition: 1-Output 2-GND 3-VCC Wide detecting scope Fast response and High sensitivity Simple drive circuit Stable and long life
MQ-3 ALCOHOL ETHANOL GAS SENSOR MODULE

In Stock: 200

Add:

Model: RCS-SENSORS-523
Price: Rs260.00

Weight: 0grams

MQ-3 ALCOHOL ETHANOL GAS SENSOR MODULE This alcohol sensor is suitable for detecting alcohol concentration in your breath, just like any other common breathalyzer. It has a high sensitivity and fast response time. This Sensor provides an analog resistive output based on alcohol concentration. Features of MQ-3 ALCOHOL ETHANOL GAS SENSOR MODULE :   5V DC circuit Requires heater voltage Operation Temperature: -10 to 70 degrees C Heater consumption: less than 750mW 16.8mm diametery 9.3 mm height without the pins
MQ-4 METHANE GAS SENSOR MODULE

In Stock: 200

Add:

Model: RCS-SENSORS-524
Price: Rs195.00

Weight: 300grams

MQ-4 METHANE GAS SENSOR MODULE Sensitive material of MQ-4 gas sensor is SnO2, which with lower conductivity in clean air. When the target combustible gas exist the sensors conductivity increases higher along with the gas concentration rising. MQ-4 gas sensor has high sensitivity to Natural gas, Methane and could be used to detect both Methane and Propane. The sensor could be used to detect different combustible gas especially Methane, its low cost and suitable for different application. Features of MQ-4 METHANE GAS SENSOR MODULE :   High sensitivity to Combustible gas in wide range High sensitivity to Natural gas Methane, Coal gas, CO etc gas Fast response Wide detection range Stable performance, long life, low cost Simple drive circuit Applications of MQ-4 METHANE GAS SENSOR MODULE :   Domestic gas leakage detector Industrial Combustible gas detector Portable gas detector Gas leak alarm, Gas detector
MQ-5 LIQUEFIED GAS & COAL GAS SENSOR MODULE

In Stock: 200

Add:

Model: RCS-SENSORS-525
Price: Rs235.00

Weight: 0grams

MQ-5 LIQUEFIED GAS & COAL GAS SENSOR MODULE The MQ5 is used in gas leakage detecting equipments in consumer and industrial applications, this sensor is suitable for detecting LPG, natural gas and coal gas. The sensitivity can be adjusted by using the potentiometer. Features of MQ-5 LIQUEFIED GAS & COAL GAS SENSOR MODULE :   Power supply needs: 5V Interface type: Analog Interface type: Analog Pin Definition: 1-Output 2-GND 3-VCC High sensitivity to LPG, natural gas, town gas Small sensitivity to alcohol, smoke Fast response Stable and long life Simple drive circuit Size: 40x20mm
Your IP Address is: 54.166.150.10
Copyright © 2017 Robotscraft. Powered by Zen Cart