All Products

MQ-6 ISOBUTANE PROPANE GAS SENSOR MODULE

In Stock: 200

Add:

Model: RCS-SENSORS-526
Price: Rs195.00

Weight: 0grams

MQ-6 ISOBUTANE PROPANE GAS SENSOR MODULE This sensor module utilizes an MQ-6 as the sensitive component and has a protection resistor and an adjustable resistor on board. The MQ-6 gas sensor is highly sensitive to LPG, iso-butane, propane and less sensitive to alcohol, cooking fume and cigarette smoke. It could be used in gas leakage detecting equipments in Domestic and Industrial applications. The resistance of the sensitive component changes as the concentration of the target gas changes. Features of MQ-6 ISOBUTANE PROPANE GAS SENSOR MODULE :   Continuous Analog output Low cost and compact size
MQ-7 CARBON MONOXIDE GAS SENSOR MODULE

In Stock: 200

Add:

Model: RCS-SENSORS-527
Price: Rs270.00

Weight: 0grams

MQ-7 CARBON MONOXIDE GAS SENSOR MODULE A carbon monoxide detector for the Arduino-based DIY security system. The carbon monoxide detector is a semiconductor gas sensor tuned to detect carbon monoxide. It is in the same family of devices as the smoke detector sensor, measuring the change in surface conductivity of tin dioxide in the presence of carbon monoxide. This sensor has a high sensitivity and fast response time. The sensor's output is an analog resistance. Features of MQ-7 CARBON MONOXIDE GAS SENSOR MODULE :   Characteristic Gas:100ppmm co. Sensitive Resistance:2K to 20K in 100ppm co. Sensitivity: ≥3% Response Time: ≤1s. Response Time: ≤30s. Heating Resistance:31±3 Heating Current: ≤180mA Heating Voltage:5.0V±0.2V /1.5±0.1V Heating Power: about 350mW. Conditions: Ambient Temperature:-20C~+50C. Humidity: ≤95%RH. Oxygen Content:21% Size: 3.5cm X 2.2cm - 1.4inch x 0.9inch.
PIEZO VIBRATION SENSOR – LARGE WITH MASS

In Stock: 200

Add:

Model: RCS-SENSORS-506
Price: Rs510.00

Weight: 200grams

PIEZO VIBRATION SENSOR – LARGE WITH MASS This basic piezo sensor often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch. Comes with solderable crimp pins and a mass attached to the tip. This mass increases the sensitivity to motion. Features of PIEZO VIBRATION SENSOR – LARGE WITH MASS :   Solder Tab Connection Withstands High Impact Operating Temperature: 0ºC to 85ºC Storage Temperature: -40ºC to 85 ºC Applications of PIEZO VIBRATION SENSOR – LARGE WITH MASS :   Solder Tab Connection Withstands High Impact Operating Temperature: 0ºC to 85ºC Storage Temperature: -40ºC to 85 ºC
Pixhawk PX4 2.4.8 32bit Flight Controller with accessories

In Stock: 10

Add:

Model: RCS-DR-8701
Price: Rs9,900.00

Weight: 100grams

The benefits of the Pixhawk system include integrated multithreading, a Unix/Linux-like programming environment, completely new autopilot functions such as sophisticated scripting of missions and flight behavior, and a custom PX4 driver layer ensuring tight timing across all processes. These advanced capabilities ensure that there are no limitations to your autonomous vehicle. Pixhawk allows existing APM and PX4 operators to seamlessly transition to this system and lowers the barriers to entry for new users to participate in the exciting world of autonomous vehicles. The flagship Pixhawk module will be accompanied by new peripheral options, including a digital airspeed sensor, support for an external multi-color LED indicator and an external magnetometer. All peripherals are automatically detected and configured. This package includes all essential parts required to make your multirotor, plane or rover working and controllable through autopilot. Other accessories like telemetry, ... more info
Quadcopter Legs Pair

In Stock: 10

Add:

Model: RCS-DR-6012
Price: Rs249.00

Weight: 150grams

Quadcopter Legs Pair The quadcopter frame legs pair is a high quality Plastic frame legs that offers both great looks and performance. Built from light weight yet extremely rigid synthetic material, it is the best combination of weight savings and strength in the price it comes in. Features of Quadcopter Legs Pair: Easy to Use. Weight: 240g. Width: 498mm. Motor Bolt Holes: 22~32mm. Long life. Applications of Quadcopter Legs Pair: These are used in quad-copter.
R450 Quadcopter Frame with Integrated PCB

In Stock: 10

Add:

Model: RCS-DR-6010
Price: Rs900.00

Weight: 200grams

R450 Quadcopter Frame with Integrated PCB The R450 is a well thought out 450mm quad frame built from quality materials. The main frame is glass fiber while the arms are constructed from ultra durable polyamide nylon. The R450 features integrated PCB connections for direct soldering of your ESCs. This eliminates the need for a power distribution board or messy multi-connectors keeping your electronics layout very tidy. Specifications of R450 Quadcopter Frame with Integrated PCB: Width: 450mm. Height: 55mm. Weight: 270g (w/out electronics). Motor Mount Bolt Holes: 16/19mm. Features of R450 Quadcopter Frame with Integrated PCB: Built from quality glass fiber and polyamide nylon. Integrated PCB connections for direct soldering of your ESCs Pre-threaded brass sleeves for all of the frame bolts. Colored arms for orientation to keep you flying in the right direction. Large mounting tabs on main frame bottom plate for easy camera mounting. Easy assembly. Applications of R450 Quadcopter Frame ... more info
R550 Hexacopter Frame with Integrated PCB For Easy Wiring

In Stock: 10

Add:

Model: RCS-DR-6011
Price: Rs1,199.00

Weight: 150grams

R550 Hexacopter Frame with Integrated PCB For Easy Wiring The R550 Hexacopter Frame is a 550mm hexacopter frame built from quality materials. The main frame is glass fiber while the arms are constructed from ultra durable polyamide nylon. Features of R550 Hexacopter Frame with Integrated PCB For Easy Wiring: Width: 550mm Height: 55mm Weight: 435g Motor Mount Bolt Holes: 16/19mm Applications of R550 Hexacopter Frame with Integrated PCB For Easy Wiring: DIY Quadcopter projects. Quadrotor (quadcopter). Electrical/Electronic projects quadcopter.
Rasberry PI 3

In Stock: 100

Add:
Units:  100

Model: RasberryPi
Price: Rs3,300.00

Weight: 400grams

Product description Built on the latest Broadcom 2837 ARMv8 64bit processor the Raspberry Pi 3 model B is faster and more powerful than its predecessors. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2.5A adapter is required. Made in the U.K. supplied under license by RS components.   Technical Details   Brand Raspberry Pi Series Model B Item Height 34 Millimeters Item Width 7.6 Centimeters Screen Size 60 Inches Item Weight 50 g Product Dimensions 12.2 x 7.6 x 3.4 cm Item model number RASPBERRYPI3-MODB-1GB Processor Count 4 RAM Size 1 GB Wireless Type 802.11 B/G Number of USB 2.0 Ports 4 Operating System Ubuntu Mate, Snappy Ubuntu Core, PINET, Windows 10 IOT, Raspbian, Pidora, ... more info
RGB LED MODULE

In Stock: 200

Add:

Model: RCS-SENSORS-518
Price: Rs145.00

Weight: 300grams

RGB LED MODULE It is an RGB SMD 3 Colour LED Module 5050 Full Color Pwm for Arduino on a PCB for convenient access. Features of RGB LED Module :   Uses 5050 full-color LED. The RGB tricolor meet current limiting resistors to prevent burn out. Dimensions:31mmX37mm Through PWM adjust three colors can be blended to get a different color.
Soil Moisture Sensor

In Stock: 200

Add:

Model: RCS-SENSORS-511
Price: Rs100.00

Weight: 200grams

Flame Sensor Module This is a simple water sensor, can be used to detect soil moisture Module Output is high level when the soil moisture deficit,or output is low. Features of Soil Moisture Sensor :   Operating voltage: 3.3V~5V. Dual output mode,analog output more accurate A fixed bolt hole for easy installation With power indicator (red) and digital switching output indicator (green) Panel PCB Dimension: Approx.3cm x 1.5cm Soil Probe Dimension: Approx. 6cm x 3cm Cable Length: Approx.21cm VCC: 3.3V-5V
Your IP Address is: 54.166.150.10
Copyright © 2017 Robotscraft. Powered by Zen Cart